open-source electrophysiology

pyControl Peripherals

IMG-0193.png
IMG_0022 .JPG
poke.jpg
IMG-0194.jpg
IMG_0058 .jpg
IMG_0026 .JPG
IMG-0565 (1).JPG
IMG_0030  .jpg
IMG_0040 .JPG
IMG_0036 .JPG
IMG_0046.JPG
IMG-0193.png
IMG_0022 .JPG
poke.jpg
IMG-0194.jpg
IMG_0058 .jpg
IMG_0026 .JPG
IMG-0565 (1).JPG
IMG_0030  .jpg
IMG_0040 .JPG
IMG_0036 .JPG
IMG_0046.JPG

pyControl Peripherals

from 30.00

It includes one unit of the selected pyControl Peripheral.

User must provide Ethernet cables to connect the pyControl Peripherals to the pyControl Breakout Board (available on the pyControl Accessories).

For the Stepper Driver and the Port Expander user must also provide an extra 12V Wall Adapter.

 

If you need a formal quote and/or prefer bank transfer as the payment method, please contact us via info[a]oeps.tech.

 

Board:
Quantity:
Add To Cart

Audio Board

Audio amplifier board for driving a speaker to produce auditory stimuli. The board uses the Micropython DAC for stimulus generation, and had a digital potentiometer for setting the volume, as well as a manual potentiometer for coarse volume adjustments. The board must be plugged into a behaviour port on the pyControl Breakout Board that supports DAC output and I2C serial communication (ports 3 and 4).

Docs

Repository

Poke

Nose-poke port with infra-red beam, stimulus LED and socket to connect a solenoid valve. Plugs into any behaviour port on the pyControl Breakout board.

Suitable solenoids are the LHDA1231515H from Lee Company (recommended for water only) and the WZ-98302-02 from Cole-Palmer (a pinch valve so potentially less accurate, but shouldn't seize up with sucrose).

The user must also provide the necessary tubing accessories to deliver the water. Such as a steel tube (2 mm outer diam., 1 mm inner and 40 mm length) (SPLS2-40, Misumi), PVC tubing with 1.6 mm inner diam. (WZ-96480-00, Cole-Palmer) or 3 mm inner diam. (WZ-96480-01, Cole-Palmer), T connectors with 1.6 mm (WZ-30703-70, Cole-Palmer) or 3.2 mm (WZ-40623-65, Cole-Palmer) and 3.2 mm to 1.6 mm adaptor (WZ-40622-22, Cole-Palmer).

Docs

Repository

LED Driver

A constant current LED driver for optogenetic stimulation. The drive current can be set manually from 30 - 750mW. Plugs into any behaviour port on the pyControl Breakout board.

User must provide an optogenetic LED such as the Headstage found on the pyControl Accessories.

Docs

Repository

Stepper Driver

Board for controlling a stepper motor using the Easydriver stepper motor driver. Plugs into any behaviour port on the pyControl Breakout board.

Docs

Repository

Rotary Encoder

Adaptor for connecting a rotary encoder to pyControl, used for e.g. measuring the speed of a running wheel. Compatible with the Avago HEDM-55xx series rotary encoders (datasheet). Must be plugged into behaviour port 1 on the pyControl Breakout board.

Docs

Repository

Port Adapter

Exposes all the lines on a pyControl Breakout board behaviour port to a screw terminal connector, and the driver lines to a set of header connectors. Can be used to connect solenoids, houselights , fans etc. to a pyControl system.

Pass Through Adapter

Connects between a pyControl Breakout Board behaviour port and a pyControl Peripheral, and exposes all the lines of the breakout board to screw terminal connector and the driver lines to a pair of header connectors, allowing lines not used by the Peripheral to be used elsewhere.

Port Expander

The port expander board uses a serial to parallel IO expander IC to run 8 behaviour ports from a single behaviour port on the pyControl Breakout Board. It must be connected to a behaviour port that supports I2C serial communication (ports 3 and 4 on the pyControl Breakout Board).

Docs

Repository