The small gold pins are compatible with the new drive implant.
Used to connect electrode wires to the Electrode Interface Board (EIB) holes.
Tweezer and Serrated Jaw Plier
Tools to help positioning the Gold Pins into the EIB.
1 x Serrated Jaw Pliers
Add To Cart
Aditional info regarding the Tweezer and Jaw Pliers
The precision tweezer is used to place the gold pins in the EIB electro holes and the serrated jaw plier is used to force the gold pins to cinch into the holes.
The available magnet allows to slightly magnetize the tweezer in order to better hang the gold pins. When the tweezer is magnetized, touching the gold pins with the tweezer will hang them by its head which is a good position for inserting into the EIB hole.
To magnetize the tweezer, stroke the tweezer tips with the magnet in one direction until achieve the desired force. To reduce, stroke it in the opposite direction.
A picture with the Gold Pin, the EIB and the Serrated Jaw Pliers in action can be found in the top of this page (last picture of the available).